dmesg - Phenom II X4 955, 560ti, 8GB DDR2-800
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfc90fff] usable
BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfcf3000-0x00000000cfcfffff] ACPI data
BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA770-UD3/GA-MA770-UD3, BIOS FKb 07/08/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFD00000 mask FFFFFFF00000 uncachable
4 base 0000CFE00000 mask FFFFFFE00000 uncachable
5 base 000100000000 mask FFFF00000000 write-back
6 base 000200000000 mask FFFFE0000000 write-back
7 base 000220000000 mask FFFFF0000000 write-back
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
total RAM covered: 3325M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfc91 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f53d0-0x000f53df] mapped at [ffff8800000f53d0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000092000] 92000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[mem 0x22fe00000-0x22fffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
[mem 0x22c000000-0x22fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfc90fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfc90fff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34c36000-0x36612fff]
ACPI: RSDP 00000000000f6e00 000014 (v00 GBT )
ACPI: RSDT 00000000cfcf3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfcf3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfcf30c0 007472 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfcf0000 000040
ACPI: SSDT 00000000cfcfa600 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfcfaec0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfcfaf00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfcfa540 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fff9000-0x22fffdfff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00097fff]
node 0: [mem 0x00100000-0xcfc90fff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096168
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 13235 pages used for memmap
DMA32 zone: 846993 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1245184 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfc91000-0xcfceffff]
PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf2fff]
PM: Registered nosave memory: [mem 0xcfcf3000-0xcfcfffff]
PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022fc00000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063392
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 8a8a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 8077956K/8384672K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 306716K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3214.772 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.54 BogoMIPS (lpj=12859088)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (25718.17 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:36:49, date: 10/15/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [b000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
TOM2: 0000000230000000 aka 8960M
bus: [bus 00-04] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0500000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe04fffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf7ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xdc000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1102:000b] type 00 class 0x040300
pci 0000:02:00.0: reg 0x10: [mem 0xfcff0000-0xfcffffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xfcc00000-0xfcdfffff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xfb000000-0xfbffffff 64bit]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x00098400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfc91000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] could not be reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:09: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0xcfd00000-0xcfdfffff] has been reserved
system 00:09: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26484K (ffff880034c36000 - ffff880036613000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000c6
microcode: CPU1: patch_level=0x010000c6
microcode: CPU2: patch_level=0x010000c6
microcode: CPU3: patch_level=0x010000c6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1413401809.980:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15957
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:748:647
acpi LNXCPU:00: hash matches
rtc_cmos 00:04: setting system clock to 2014-10-15 19:36:51 UTC (1413401811)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
systemd-udevd[138]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
scsi0 : pata_atiixp
r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000c5c000, 00:24:1d:2e:e3:9c, XID 1c4000c0 IRQ 43
r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
ata8: SATA link down (SStatus 0 SControl 300)
usb 1-6: new high-speed USB device number 4 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: ST3000DM001-1CH166, CC26, max UDMA/133
ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: ATAPI: Optiarc DVD RW AD-5240S, 1.01, max UDMA/100
ata6.00: configured for UDMA/133
ata7.00: configured for UDMA/100
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-9: ST3000DM001-1CH166, CC27, max UDMA/133
ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3214.525 MHz
usb 1-6: New USB device found, idVendor=03f0, idProduct=2512
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 2 ports detected
ata4.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC27 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC26 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: CD-ROM Optiarc DVD RW AD-5240S 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg4 type 5
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
sdd: sdd1 sdd2
sd 5:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 4-2: new full-speed USB device number 2 using ohci-pci
random: nonblocking pool is initialized
usb 4-2: New USB device found, idVendor=06a3, idProduct=f620
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: PS2700 Rumble Pad
usb 4-2: Manufacturer: Jess Technology Co., Ltd.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Jess Technology Co., Ltd. PS2700 Rumble Pad as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3
hid-generic 0003:06A3:F620.0001: input,hidraw0: USB HID v1.11 Gamepad [Jess Technology Co., Ltd. PS2700 Rumble Pad] on usb-0000:00:12.1-2/input0
Switched to clocksource tsc
usb 6-2: new low-speed USB device number 2 using ohci-pci
usb 6-2: New USB device found, idVendor=046d, idProduct=c01e
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB-PS/2 Optical Mouse
usb 6-2: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input4
hid-generic 0003:046D:C01E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2/input0
usb 6-3: new full-speed USB device number 3 using ohci-pci
usb 6-3: New USB device found, idVendor=0451, idProduct=1446
usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-3:1.0: USB hub found
hub 6-3:1.0: 4 ports detected
usb 3-1: new full-speed USB device number 2 using ohci-pci
usb 3-1: New USB device found, idVendor=045e, idProduct=0719
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Xbox 360 Wireless Receiver for Windows
usb 3-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft
usb 3-1: SerialNumber: E0160850
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 6-3.2: new low-speed USB device number 4 using ohci-pci
usb 6-3.2: New USB device found, idVendor=040b, idProduct=2012
usb 6-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-3.2: Product: 2.4GHz Mouse
input: 2.4GHz Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3.2/6-3.2:1.0/input/input5
hid-generic 0003:040B:2012.0003: input,hidraw2: USB HID v1.10 Keyboard [2.4GHz Mouse] on usb-0000:00:13.1-3.2/input0
input: 2.4GHz Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3.2/6-3.2:1.1/input/input6
hid-generic 0003:040B:2012.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [2.4GHz Mouse] on usb-0000:00:13.1-3.2/input1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[358]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Initialized drm 1.1.0 20060810
WARNING! power/level is deprecated; use power/control instead
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ctxfi: chip 20K2 model SB0880 (1102:0041) is found
ctxfi: Use xfi-native timer
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
type=1400 audit(1413394618.786:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=457 comm="apparmor_parser"
type=1400 audit(1413394618.786:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=457 comm="apparmor_parser"
type=1400 audit(1413394618.786:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=457 comm="apparmor_parser"
type=1400 audit(1413394618.786:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=457 comm="apparmor_parser"
type=1400 audit(1413394618.786:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=457 comm="apparmor_parser"
type=1400 audit(1413394618.786:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=457 comm="apparmor_parser"
type=1400 audit(1413394618.786:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
type=1400 audit(1413394618.786:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
type=1400 audit(1413394618.786:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
type=1400 audit(1413394618.786:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input7
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.2/input/input8
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.4/input/input9
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.6/input/input10
usbcore: registered new interface driver xpad
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (729) killed by TERM signal
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1413394624.478:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=865 comm="apparmor_parser"
type=1400 audit(1413394624.478:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser"
type=1400 audit(1413394624.478:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser"
type=1400 audit(1413394624.478:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser"
type=1400 audit(1413394624.478:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser"
type=1400 audit(1413394624.478:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser"
type=1400 audit(1413394624.526:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=869 comm="apparmor_parser"
type=1400 audit(1413394624.526:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=869 comm="apparmor_parser"
type=1400 audit(1413394624.526:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=869 comm="apparmor_parser"
type=1400 audit(1413394624.538:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=864 comm="apparmor_parser"
init: cups main process (898) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1224) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 78 callbacks suppressed
type=1400 audit(1413394654.734:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2153 comm="apparmor_parser"
type=1400 audit(1413394654.734:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2153 comm="apparmor_parser"
type=1400 audit(1413394654.734:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2153 comm="apparmor_parser"